Important:
In order to have your ad placed you must include with your Want Ad, the following information:
All the above information you wish to list - should be emailed to: Metal Web News.
Important
Be certain to indicate in the Subject Area of your message what you are submitting. I get too many daily spam emails to look at each email I receieve. If your subject is not appropriate for what you are submitting, I most likely will not see it.
(03/08/2005)
WANTED - Owners & Parts Manual
I have purchased a 10" Sheldon lathe and require the following:
(03/08/2005)
WANTED - Tubing Coping Machine
I am looking for a coping machine, to "fish mouth" the end of tubing. This is done in preparation for welding tubing together. Linders is one name brand.
I deal with quite a wide verity of tube size. Largest so far is 3" od with a wall of .083. Smallest .500 od with a .187 wall. The linders machine is one name brand. It uses a belt sanding type setup, with a v-block that can be angled and fed into the belt end roller precisely.
4026 Boston Ave.
Akron, Ohio 44319-2854
Telephone: 330-644-4310
E-mail: Mike Marken
(03/08/2005)
WANTED - Collets
I'm looking for Collets for a Kearney & Trecker 2D Rotary Head milling machine.
(03/08/2005)
WANTED - Poliching Hammer - English Wheel
I,m in the process of opening a motorcucle customizing shop. I'm in need of the following:
(03/08/2005)
WANTED - Tail Stock - Steady Rest
I need a tail stock for a 14" Lodge&Shipley.
Also need a steady rest for a model 922 Logan lathe.
Contact: Lon Ninemire
Hill City, KS
(03/08/2005)
WANTED - Manual'Parts Book
I am looking for a manual and/or parts book for a Leinweber UW21 Multi use machine.
This is a full sized lathe (about 2,700 lb. worth.) with the capability of milling shaping broaching and several other processes depending on what accessories you have.
Please Email with any information you may have available to: Bob Phillips
Naselle, Wa.
(03/08/2005)
WANTED - Mill
Clausing Mill 8520
Email: Robert Heineman
The Woodlands, TX 77381
Telephone: 936-273-0121
(03/11/2005)
WANTED - Collets
I am looking for Collets for my Bridgeport, M Head, B&S #7 and Drawbar.
Prefer a set, but 3/16", 3/8" and 1/2" would allow me to start
Or A complete M head with #2 MT
Email: Dave Molzahn
5489 West 134th Street
Savage, MN 55378
Telephone: (cell) 612 385-4290
Fax: 952-8900-0273
(03/17/2005)
WANTED - Parts for Atlas Lathe
10F-9XY Carriage Assembly or Component Parts.
Email: George Cole
333 North Madison Road
Orange, VA 22960
Telehone: 540-672-1768
(05/28/2005)
WANTED - Tailstock for Lathe
I am looking for a tailstock to fit an early (pre-1940) Boye & Emmes 18” (swing) lathe.
Email: Bob Bennett
17 Orrell Street
Yemassee, S.C. 29945
(05/28/2005)
WANTED - Steady Rest for Lathe
The item wanted is: South Bend 10" Heavy Telescoping Jaw Steady Rest
Email: Mario DeAngelis
56 Barley Sheaf Road
Flemington, NJ 08822
Telephone: 973-724-7616
WANTED - Lathe Parts
For a Standard Modern 11" Ultimate Series 2000 lathe:
(08/05/2005)
WANTED - Lathe Parts
Complete tailstock assembly for a Model 830 Logan lathe.
Email: Dennis Tittle
Marston, MO 63866
Telephone: 573-643-2784 (work)
573-643-2681 (after 5:00 pm)
(08/31/2005)
WANTED - Books
Used copies of any "Shop Wisdom" books by the Village Press (i.e. Shop Wisdom of Rudy Kouhoupt, Vol 1 etc.)
Email: Ronald Young
Chattanooga, TN 37421
(09/20/2005)
WANTED - Lathe Parts
I have a very old LeBlond/Regal Lathe circa 1933 Model A244 serial #4777.
I need of a compound rest. that measures approximately 2"X6"X1-1/2".
It bolts on almost right below the tool post. Would take entire carriage if available. Mine has power cross feed and carriage control which makes it that much more rare.
At this point I am building my own but due to the age of the lathe I am not sure how accurate it will be when completed.
If you can help email me soonest.
Email: Harry Sappington
10035 Buckeye Road
Potosi, Mo. 63664
Phone: 573-438-7423 or 573-438-6281 (Emmitt)
(09/23/2005)
WANTED - Lathe & Mill Parts
I am looking for a steady rest for a Rockwell 11” Metal Lathe.
Also need a gear for a Rockwell Milling Machine, Model #21-100,
Part Number 450-01-051-5001, the Ring Gear for the fine quill downfeed.
Email: Mike Calhoun
Plano, Texas 75023
Telephone: 972-618-4885
(10/04/2005)
WANTED - Lathe Parts
Any accessories for a 12"x36" Clausing 5914. Collet closer/collets,
taper attachment, 4 jaw chuck, face plate, other items.
Email: Jack Krizmanic
Long Beach, Calif
Telephone: (562) 243-9153
(10/19/2005)
WANTED - Miller Welder Parts
I am looking for a Miller PC 300 pulse control, part # 042297
This is used with a Miller Sycrowave Tig Welder.
Email: Robert Caletti
Menlo Park, CA 94025
Telephone: 408-782-3439
(10/19/2005)
WANTED - Miller Welder Parts
I need a complete cross slide for a 13" leblond regal lathe.
Email: Roger Doyle
North Carolina
(10/20/2005)
WANTED - Lathe Parts
Need complete set of Carriage Gears for Hardinge HLV-H Serial Number 4235.
It has original style electric power feed.
Email: Dave Andersen
2 East Main Road
Little Compton RI
Telephone: 401-635-8726
(11/05/2005)
WANTED - Lathe Parts
I am looking for a Tool Post and Tool Holder for a Logan 825 Lathe.
Email: Rich Scurto
Sprinfield,Va 22150
Telephone: 703 451 3360
(11/26/2005)
WANTED - Band Saw
Looking for a metal cutting Vertical Band Saw.
16" to 20" throat, such as Do All, Grob, Powermatic
Email: Kelson Smith
Williamsburg MA. 01096
(11/27/2005)
WANTED - Lathe Part
I need a Cluster Gear, for a Cluasing-Colchester 12” VS lathe,
It has the # 600 at the lower left hand corner. This is the shift gear for high and low head stock speed. There are three gears on it, which are 28/46/33 teeth.
Email: George A. Rudd
1100 Main
Montrose, Iowa 52639
Phone # 319-463-7485
(11/29/2005)
WANTED - Lathe Parts
Wanted: Clausing Colchester 13 Lathe Parts.
I am looking for a tailstock, steady rest and follow rest to fit a model 6500 13" Clausing Colchester lathe.
Email: John Savoca
Kelsey Ca. 95667
Telephone: 530-626-7540
Fax: 530-295-9028
(12/11/2005)
WANTED - Lathe Parts
Parts or Faceplate -chuck- for the Sears Roebuck Lathe
Model #10920630.
Email: Randy Smoot
Benson AZ 85602 USA
Telephone: 520-586-0916
(12/11/2005)
WANTED - Lathe Parts
I have a Birmingham (China ) 1340 Gear head lathe,
I want After market steady & follow rest parts W/ Bearings.
I have no idea what the part is called. The parts I want to replace are:
I/S threaded and grooved steel W/brass tips.
Steady Rest Part Needed
Email: Carl Smith
PO Box 966
Boulevard, CA 91905
Telephone: 619-766-4833
(12/19/2005)
WANTED - Lathe Parts
I need a Carriage Assembly fror a Clausing Lathe - Model 111.
It was made in the 40's with a 12 in swing.
Email: John Burt
1748 Highway 49
Dover, TN 37058
Telephone: 931-232-6182
(12/19/2005)
WANTED - Lathe Manuals
I own a Montgomery Ward Metal Lathe
Model # 04TLC-700A (36" long) approximate.
I need an owners manual & parts break down manual.
Not sure what the age is except very old.
Email: William E. Wright
Avon, Illinois 61415
Telephone : 309-465-3974
(12/19/2005)
WANTED - Lathe Parts
Parts for 1977 Clausing Colchester 15" x 36" lathe
P/N 55081-0 Brkt., Holds bearing for far side of cross slide shaft.
10" or 12" four jaw chuck with D1-6 mount
Email: John Miller
Joplin, MO 64801
Telephone: 417-623-2173
(12/19/2005)
WANTED - Lathe Parts
Just purchased a Standard Modern 11/20 lathe that does not have a tailstock, steady rest, follow rest, or chucks.
I'm interested in replacing all of these items, but the tailstock is most urgently needed.
Perhaps other SM models used the same pieces? Any help with this is most appreciated.
Email: Craig Maxie
Calgary, Alberta, Canada
Telephone: (403) 289-0310
(12/31/2005)
WANTED - Lathe Parts
Tailstock and Steady Rest for a 13" x 40" Western Lathe KWL2, Manuals, Chucks
Email: Al Munnik
Langley, BC, Canada
Telephone: (604)888-7105
Fax: (604) 888-0713
(01/06/2006)
WANTED - Lathe Parts
I am looking for a Micro Carriage Stop - Clausing #7118. 0r generic that will fit.
I have a Model: 5917, Serial: 501854, Clausing 12 inch Lathe
Email: Les Garaventa
Reedsport, OR 97467
Telephone: 541 -271 -1171
(01/10/2006)
WANTED - Lathe Parts
I'm looking for the gear for my rockwell 11" lathe.
On page 30 of the manual - Part Number 414-01-351-5032 - Pulley with gear 44 teeth, left hand.
Email: Randy Schwartz
York Pa. 17402
Telephone: 717-755-8370 or 717- 515-7411
(01/14/2006)
(01/18/2006)
(01/19/2006)
(01/24/2006)
(02/06/2006)
(02/06/2006)
(02/06/2006)
(02/06/2006
(02/13/2006)
(02/18/2006)
(02/21/2006)
(03/06/2006)
(03/22/2006)
(04/03/2006)
(04/09/2006)
(04/09/2006)
(07/11/2006)
(08/15/2006)
WANTED - Lathe Parts Auxillary Head for an 11" Logan lathe. This website has both
a description and a picture of one: www.lathes.co.uk/logan/page6.html (07/15/2006) (09/09/2006)
WANTED - Lathe Parts A bed gap for a 15" Colchester 6500 series, MCH #4 built 1959, and a
steady rest.
(09/10/2006)
WANTED - Lathe Parts
(10/01/2006)
WANTED - Lathe Parts
(10/01/2006)
WANTED - Lathe Parts
(10/14/2006)
WANTED - Bridgeport Mill Parts
(10/19/2006)
WANTED - Lathe Parts
(10/20/2006)
WANTED - Machinery
(11/20/2006)
WANTED - Lathe Parts
(11/29/2006)
WANTED - Lathe Parts
(12/24/2006)
WANTED - Mill
(12/31/2006)
WANTED - Bridgeport Manual
I am looking for a repair manual for a Bridgeport Milling Machine, Model J
Head, Serial No. J85166.
(01/07/2007)
WANTED - Compound Slide (01/07/2007)
WANTED - Lathe Parts
(01/22/2007)
WANTED - Lathe Manual
(01/22/2007) WANTED - Lathe Parts
(01/25/2007) WANTED - Lathe Parts Email: Patrick Teig WANTED - Lathe & Lathe Parts
(02/05/2007) WANTED - Lathe Parts
(02/24/2007) WANTED - Lathe Parts
(02/24/2007) WANTED - Lathe Parts
(02/24/2007) WANTED - Lathe Parts
(03/06/2007) WANTED - Lathe Parts
(03/06/2007) WANTED - Lathe Parts
(03/21/2007) WANTED - Lathe Parts
(04/07/2007) WANTED - Mill Parts
(06/12/2007) WANTED - Lathe Parts
(06/30/2007) WANTED - Mill
(07/15/2007) WANTED - Lathe Parts
(07/15/2007) WANTED - Collets
Click here for Picture of the Collet
88 Standiford Avenue
(08/27/2007) WANTED - Trip Hammer
(10/02/2007) WANTED - Lathe Parts
(10/02/2007) WANTED - Lathe Operator's Manual
(10/02/2007) WANTED - Lathe Parts - Bull Gear
(10/02/2007) WANTED - Mill Parts
(10/14/2007) WANTED - Lathe Parts & Manual
(10/14/2007) WANTED - Lathe Parts
(10/14/2007) WANTED - Power Hammer
(10/14/2007) WANTED - Mill Parts
(11/06/2007) WANTED - Lathe Parts
(11/06/2007) WANTED - Lathe Parts
(11/25/2007) WANTED - Drill Press Parts
(12/26/2007) WANTED - Lathe
(12/26/2007) WANTED - Lathe Part
(12/28/2007) WANTED - Mill Part
(01/14/2008) WANTED - Lathe Parts Manual
(01/15/2008) WANTED - Lathe Parts
(01/20/2008) WANTED - Bandsaw Parts
(02/05/2008) WANTED - Milling Machine Parts, Manuals
(03/03/2008) WANTED - Lathe Parts
(03/09/2008) WANTED - Lathe Parts
(04/06/2008)
WANTED - Lathe Parts I have a Monarch 10EE lathe. I need:
(04/06/2008) WANTED - Lathe Parts Sheldon M series lathe,and am looking for a 30 tooth formica gear from the reverse plate assembly. (04/06/2008) WANTED - Lathe Taper Attachment I am looking for a Standard Modern Taper Attachment for a 2000 lathe 11 X 20. (04/28/2008 WANTED - Lathe Parts
(04/29/2008 WANTED - Lathe Parts
(05/02/2008 WANTED - Lathe Parts I looking for the following parts for a Clausing-Colchester Lathe (Model 6525 13”X36”) Email: Roman Yarish
Created: 01/09/2002WANTED - Lathe Parts
I need a number of parts for this lathe. if you can help please email me.
Email: Robert Cody
Cullowhee, N.C. 28723
Telephone: 828-230-5288
WANTED - Lathe Parts
Cross slide shaft for a 14" Delta Rockwell metal lathe.
Any help or leads will be appreciated!
Email: Michael Smith
Purvis, MS
Telephone: 601-794-2855 or 601-550-8888 Mobile.
WANTED - Mill Attachments
Wanted for a 2HL K&T Mill
Complete set of attachments or Individualy.
Email: Michael Goleman
Port Allen, La. 70767
Telephone: 225-772-5259
WANTED - Lathe Parts
I am looking for a Steady Rest for my 9" Southbend Model "A" Lathe.
Email: Ronald Payne
Victoria, MN
Telephone: 612-730-3541
WANTED - Lathe Parts
Need: set of change gears for EMCO Compact 10 lathe.
These allow one to cut threads of various pitches.
Email: Mark Middleton
P.O. Box 280
Northeast Harbor, Maine 04662
Telephone: 207-266-3876
WANTED - Lathe Parts
Lathe Follower Rest &Taper Attachment
For a South Bend 9 inch lathe
Email: eagle572 -(AT)- comcast.net
Tucson AZ 85718
Telephone: 520-297-1282
WANTED - Lathe Parts
I have a 1931 South Bend 11"swing 48"bed lathe in need of parts for the cross slide shaft and bushing.
Also need a gear in the head but not sure what it is called.
The gear I need measures 4" abt. .650 thick and if I counted right 64 tooth, and there is a number on this gear it is 11-652
Also would like a book on this lathe if possible.
Email: Kim W. Williams
812 S. 134th
Bonner Springs, Ks 66012
Telephone: (Cell) 913-226-1709
WANTED - Lathe Parts
I’m looking for a telescopic taper attachment for a Sheldon Precision Lathe.
I’m told attachment is the same for the 13 inch (R-13) and the 15 inch (R-15).
Email: John C. Pina
8090 Highway 128
Healdsburg, CA 95448
Telephone: 707-433-8626
WANTED - Lathe Parts
Looking for a 13 inch compound to fit a Colchester 8000 lathe.
Any Clausing compound that is no thicker than 2-15/16 " will work.
Email: Joe Gay
28175 12th Avenue
Gobles, MI 49055
Telephone: 269-628-5358
WANTED - Mill for Parts
Wanted for parts K & T 2D Rotary Head Die Mill.
Anyone parting out an old style 2D which had the Bridgeport B3 collet system with drawbar?
I am in need of the spindle and spindle pulley.
May be interested in other 2D parts or accessories.
Email: Julian Morrison
102 Dogwood Lane
Clinton, Tn 37716
Telephone: 865-207-2030
WANTED - Shaper Parts
We are in need of a toolhead and clapperbox assembly for our 12" Vertical Shaper/Slotter.
Our machine is a Morey 12VS model, but Pratt-Whitney parts will work on this machine also.
Please contact the following if you can supply either of these.
Email: Karen Nestasie Purchasing Manager
Bertram Tool & Machine Co Inc.
1201 Martin Luther King, Jr Blvd.
PO Box 141
Farrell, PA 16121
Telephone: 724-983-2222
Fax: 724-983-1921
WANTED - Lathe Parts
I am in need of a quick change gear box for a 10 inch model 200 logan lathe.
Gear box model # LA-1200 series.
Email: Tom Hoshock
27632 Sutphen Rd.
Defiance, Ohio 43512
Telephone: (419) 395-1804
WANTED - Lathe
South Bend "Heavy 10" Lathe somewhere in the Phoenix, Arizona area.
Will travel between Albuquerque, NM and Los Angeles, CA. to collect.
Email: Dusty M. Erickson
Scottsdale, Arizona
Telephone: 602-971-0372
WANTED - Lathe Parts
I am looking for tailstock for 11" Sheldon lathe. Any condition considered.
Email: Jeb Watts
Nederland, TX
Telephone: 409-727-4782
WANTED - Lathe Parts
I'm looking for a Craftsman / Atlas Lathe lead screw for a 12'' lathe Model # 101.28990.
Email: Keith Hansen
Hawthorne, California
Telephone: 310-901-1476
WANTED - Lathe Parts
I'm looking for a Collet Closer and Collets for my Atlas Clausing (South Bend) Lathe.
I specifically need 1/2" and 5?8 collets for a specific job.
Email: John Copeland
Lafayette, IN
Telephone: 765-491-3746
WANTED - Lathe Parts
Need Face gear and pinion gear for 1942 Reed Prentice 20 inch lathe.
Machine uses an L-1 spindle.
Will buy an entire machine for parts if you have what I need.
Email: Kirk Knapp
Arlington, Washington
Telephone: 360-435-0766
If you know where I can get one or you have one Email, fax or call me.
If you
thnk that you possibly know where one MIGHT contact me, I'll take parts,
pieces, rusty, beat up, broken or otherwise.
If you have one and don't want
to sell it but you can give me some dimensions call me and we'll work something
out there too.
Email: Ken Garver
564 High Mountain Road
Apartment #2, Rear, 2nd. Floor
North Haledon, NJ 07508 (Northern, NJ)
Cell Phone: (862) 203-9436
Day time Telephone: (201) 569-7300 Ext. 318
Fax: (201) 569-4112
WANTED - Lathe
South Bend 10" Lathe w/tooling
Email: Donald Bistline
Vista, CA
Telephone: (760) 945-1889
Fax: (760) 758-7713
Email: Jim Moore
Trenton, FL
Telephone: (352) 472 1836
It Is a 2 tumbler box.
Email: Bill Rankin
Waukesha, WI
Telephone: 262-391-4366
Email: Don Foster
Hotchkiss, Colorado 81419
Telephone: 970-872-4818
If anyone has something I might be able to use, please contact me.
Email: Roberto Romreo
4379 Center Place
Santa Fe, NM 87507
Telephone: (505) 474-3302
Email: Dave Challant
Winchester, MA
Telephone: 781-831-8890
I need at least 36" between centers.
Also, suggestions on where to find a replacement motor.
Email: Chris Pinchbeck
Hope, Maine
Telephone: 207-763-2710
1.) a used manual machine, pref a Hardinge engine lathe, or a 2nd op machine.
2.) A small CNC style lathe, pref looking for something that is 1.625diameter through spindle or my other preference would be a GT style 1 1/16 diameter spindle.
3.) A compressor to keep 2 of the above style machines running.
Need these used machines to be in good working order.
Email: Mark Crosby
Barrie, Ontario
Telephone: 705-458-2308
Looking for: Spindle for a Cam Lock Chuck (13-1002B Spindle (ASA.D1 - 4-NOSE) For a Jet Lathe BD1336R.
Serial No.110-1-263R.
Email: Edward Shroyer
1830 Republic Street
San Diego, CA 92114
Telephone: (619) 263-1447 - Fax: (619) 263-7579
1.) Srew cutting split nut
2.) Self act dog clutch
3.)Casting assy for winding carriage
Email: Mark Cooper
3, Hill Garth
Darlington, Co Durham, Dl3 9ET, England
Telephone: 0044-1325281238
Email: Mike Duffin, Jr.
Brooklyn, NY
Telephone: 516-859-0039 - 718-647-7777
Email: Dave Faenza
2048 West Penn Pike
New Ringgold, PA 17960
Telephone: (570) 386-2274
Email: Robert Hills
518 Furnace Road
Conneaut, Ohio 44030
Telephone: 814-434-4607
16733 Arvey Road
Laurel, Delaware 19956
Telephone: (302) 875-2492
Owner's Operating Manual for Pratt & Whitney floor model 18" x 72" lathe.
Email: Bob Burger
16733 Arvey Road
Laurel, Delaware 19956
Telephone: (302) 875-2492
5C lever type collet closer for Clausing 5900 lathe.
Email: Mike Brooks
Spring Hope, NC
Telephone: 919-795-6052
Milford, IL
Telephone: (815)889-4743
(02/02/2007)
Looking for english (inches) dials for a Colchester Bantam MK2 800 Lathe.
Also looking for 1 Follow and 1 Steady Rest for the same machine.
Montreal, Canada
Telephone: 450-742-2921 Fax: 450-742-0004
Email: Phillip Batson
Greenville, SC 29605
Telephone: 864-295-4298
I will also be interested in a 12" or 13" Southbend metal lathe in good condition.
Email: Stephanie.Shields
308 S. Union St.
Wilmington, DE 19805
Telephone: 302-831-2265 work 8:30 a.m. - 4 p.m. EST - 302-656-8223 evenings - Home
P. O. Box 467
Clear Lake, SD 57226
Email: John DeBrular
14 Grafton Street
Must have good flats in the bottom of the #3 Morse taper.
Email: Jess Stark
Telephone: 713-592-0377
Email: C.L. Stevens
4735 CR 380
Iowa Colony TX 77583
Email: Mack Gavitt
Cullman, AL
Telephone: 259-739-3381
I have a perfect head with motor drive.
Someone have a stripped down one or pieces parts please contact me.
Email: Mark Head
Kingston, Tennesee
Telephone: 865-603-7461
Email: Jerry Seitz
1090 S. W. Harper Road
Port Orchard, WA 98367
Telephone: 360-895-0632
Email: H Patty
Tempe, Arizona
Telephone: 480-775-7183
I need the two handles in the middle the carriage, the feed handle and the dial tread indicator.(20" Lathe is the Model).
Email: Carlos Restrepo
Telephone:(787) 319-7742
P.O.Box 170
Guaynabo P.R. 00970-0170
Puerto Rico. U.S.A
Please send price and sizes.
Email: Andrew Kulick
Sayreville, NJ 08872
Telephone: 732-257-5984
In running condition.
Email: Frank Berlin
15206 Highway U U
Bowling Green, Missouri 63334
Telephone: 816-324-5688
Email: Chris Locke
549 Spring Forest Avenue
Jacksonville, FL
Telephone: 904-334-6516
Email: Mark Ruedy
Sparta , WI
Telephone: 608-269-1948
Lathe.made 08-27-31. Ser.Number 49950.
Size of gear: 5-3/4" dia,7/8" wide X 1-1/2" bore with 3/16" keyway. 78 tooth.
My gear has teeth missing and sand pit defects.
Email: Ron McBee
Maryland
Telephone: 301-786-7161
I am also looking for a 2" dia. ground steel bar for the overarm on the mill.
Email: Bruce Hughes
4809 NW 57th Place
Kansas City, MO 64151
Telephone: 816-741-7028
Email: Ken Tieber
14737 Edgewater
Chillicothe, Il 61523
Telephone: 309-258-2496
I would like to have any other tooling that will fit it. All I have is the collet set up and a turret tail stock.
Email: Hugh Browning
482 Hwy. 395 North
Salem, AR 72576
Telephone: 870-895-4547
Or one that can be rebuilt.
Three Nail Forge and Welding
Email: E.J. McCann
22890 TV Tower Road
Kinder, LA 70648
Email: Spencer Lofland
Telephone: 979-830-4199
Fax 979-830-4029
Email: Paul Schwartz
10792 Frederick Pike
Vandalia, OH 45377
Telephone: 937 264 0126
2916 Durwood
Houston, Tx 77093
Telephone: 713-697-5056
Fax: 713-697-5089
Email: Robin Stewart
San Bartolo B.C.S., Mexico
Email: Don Lineback
Orlando, Florida
Telephone: 407-721-5400
.
You may contact me at: Email: Jim Richmond
Waupaca, Wisconsin
Telephone: 715 258 4131
If someone has one of these machines and could send me the dimensions of pulley so one could be made or cross referenced, would relaay help.
.
Email: Melissa Fulford
194 Private Road 1419
Daleville, AL 36322
Telephone: 334-503-1053
Any information of value of this working complete unit would also be appreciated.
Email: Terry L Lapp
S46 W22428 Tansdale Road
Waukesha, Wi. 53189
Telephone: 262-366-0119
Model 25-210. Also a source for internal head parts.
Email: Greg D. Sims
12207 Herrman Rd.
Manito, IL. 61546
Telephone: 309-545-2102
Email: Sheri Harasyn
12 Industrial Drive
Sylvan Lake, AB, T4S 1P4 - Canada
Telephone: 403-887-2431
Email: Michael E. Goleman
644 Oregon Avenue
Port Allen, La. 70767
Telephone: 225-772-5259
This lathe uses the speed adjust wheel and two V-belts.
This belt is 1.00" wide and 30 1/5" outside diameter.
Possible part number is 25-501
Please call of email if you have a belt or know a source.
Email: Frank Worden
Telephone: 218-341-3399
See PDF Attachments: Turnmaster Lathe - Cross
Slide - Compound
Accembly
Items Wanted: (1) Cross Slide --- part number 2402.
(1) Gib and adjusting screws.
(1) Compound Assembly (for Cross Slide).
consisting of:
Top Slide --- Part No. 2502.
Swivel Slide --- Part No. 2501.
Lead Screw and Dial.
Brass Nut.
Gib and adjusting screws.
Email: Lynn Headington
26502 - 274th Avenue
Princeton, IA 52768
Telephone: 563-289-4548
1.) a compound rest.
2.) a carriage hand wheel.
3.) a tail stock hand wheel.
Email: Rich Page
221 Jo Joy Road
Limington, Maine 04049
Telephone: 603-254-5069
Email: Les Terryn
1380 S.Scottville Rd.
Scottville, Michigan 49454
231-757-3937
See a picture of the needed Lathe Attachment.
Email: Brent Johnson
Reno, NV
Telephone: 775-233-8063
Email: Monte Messenger
Phoenix,AZ
Telephone: 623-327-1565
Need the whole compound slide and any other parts for this lathe.
Email: Kyle Renberg
2134 Gale Road
Pueblo, Co. 81006
1-719-585-4381 after 5pm MST.
1.)
Steady Rest
2.) Follower Rest
3.) Hi-speed Thread Cutting Unit
4.) Taper Attachment
5.) Carriage Stop
Toronto, ON
Telephone: 647-203-0787
Last Rev: 05/12/2008
