image

WELCOME TO

METAL WEB NEWS METALWORKING EQUIPMENT
FOR SALE LOCATOR

Your Graphical On-Line Guide to Metalworking


Metal Web News will gladly list your surplus metalworking equipment that you have for sale. This service is offered free to individual owners. These listings are limited to individual owners of equipment, commercial machinery dealer items are not solicited.

Important:
In order to have your ad placed you must include with your For Sale ad, the following information:

All For Sale information should be emailed to: Metal Web News

Important
Be certain to indicate in the Subject Area of your message what you are submitting. I get too many daily spam emails to look at each email I receieve. If your subject is not appropriate for what you are submitting, I most likely will not see it.


 

LIST YOUR SURPLUS METALWORKING EQUIPMENT HERE

Email complete details of your equipment you wish to sell to: Metal Web News

 


FOR SALE ITEMS:



FOR SALE - Screw Machine

Brown & Sharpe 00 Screw Machine
Serial number 18653- Older, belt driven, vertical cutoff, 6 position turret, set of speed & feed gears, Lipe air feed.
I can load on your open truck or trailer.
Asking Price: $500.00

Click Here for Picture of the Screw Machine
Click Here for Another Picture of the Screw Machine

Email: John Black
Alpharetta, Georgia
Telephone: 404-374-6065

(02/15/2006)


FOR SALE - Turret Lathe

W&S #3 Turret Lathe
Old, flat belt driven - W&S turret lathe.
Set of collets, couple of tool holders, 220V 3PH motor, in storage - not under power.
I can load on your open truck or trailer.
Asking Price: $350.00

Click Here for Picture of the Turret Lathe
Click Here for Another Picture of the Turret Lathe

Email: John Black
Alpharetta, Georgia
Telephone: 404-374-6065

(02/15/2006)


FOR SALE - Book

26th Edition of the Machinerys Handbook.
This is the large hardback edition. Bought new and opened one time. Absolutely mint condition. No tears, dog ears or dirty pages.
My asking price is completely negotiable and would consider equivalent value trade for hand tools. Image attached.

Click here for Picture of the Book

Email: Tony Berlin
Bloomington, In. 47403
Telephone: 812-361-8315

(11/20/2006)


FOR SALE - Engraver

Hermes Engraver.
Here's a chance work out of your home doing engraving work. This engraver sold from hermes for over $4,500.00.
It is perfect for engraving brass tags with names and phone numbers for everyone's pets (in case they wander). Also great for doing plastic plaques,or nametags etc.
Can be hand engraved,or it comes with a 110 volt motor.
A complete set of letters, and will last as long as you need it.
Asking $1,250.00 or BO. Note samples of tags,plus pictures:

Click here for Picture of the Engraver
Click here for Another Picture of the Engraver
Click here for Another Picture of the Engraver

Email: Andrew Kulick
88 Standiford Avenue
Sayreville NJ 08872
Telephone: 732-257-5984

(01/23/2007)


FOR SALE - Mill

h3>font> Enco bench top mill.
12 speeds from 85 to 2225 rpm.
Table size: 29 5/8” x 8 ½”.
Table travel: X= 20 ¾” & Y = 7”.
Spindle travel: 5 ¼”.
The head is adjustable from 5 5/8” – 17 ½” above the table.
Power: 110/220 volt.
The mill comes complete with:
A heavy duty steel table to mount it on, 4” vise, 0-12” Jacobs drill chuck, fly cutter, a set of R8 collets (1/8”, 3/16”, ¼”, 5/16”, 3/8”, ½”, 5/8”, ¾”)
The mill is currently under power and you are welcome to see and hear it run. I can load it on your trailer or in a pickup. I can deliver in the central Ohio area for fuel.
The mill is in good operating condition. I am selling it because I recently purchased a larger mill and no longer have need of this machine.
Price $700.00

Click here for Picture of the Mill
Click here for Another Picture of the Mill
Click here for Another Picture of the Mill

Email: Dave Nolting
Ashley, Ohio
Telephone: Home 740-747-3721
Work 614-438-3268

(09/16/2007)


FOR SALE - Saw Sharpener

Foley Model 387 Straight Saw Sharpener.
A Foley saw sharpener fully ready to go.
Could put you right into a part time business..Also have foley carbide circular saw sharpener. Send for pics.

Click here for Picture of the Sharpener
Click here for Another Picture of the Sharpener

Asking $695.00
Telephone: 732-257-5984

(09/20/2007)


FOR SALE - Lathe

Sheldon Lathe with complete tooling package.
Sheldon Catalog #ES56P, S/N ES 32984
11" swing with Aloris AXA tooling for 1/4" I.C. inserts.
6" 3-Jaw Buck Chuck, 8" 4 Jaw Chuck, Faceplate, Centers and more.
Recently reworked, holding excellent tolerances.
Currently under power in working shop.
Sheldon manual on file

Click here for Picture of the Lathe
Click here for Another Picture of the Lathe

Email: Jim Gannon
Price:$2,450.00
Blacksburg, SC
Tel./FAX: 864-839-9314

(09/27/2007)


FOR SALE - Shear

Edwards Alligator Shear #5. Up for sale is a rare find. A perfect edition to your metal shop, and Edwards Alligator Shear #5.
This hand powered shear will cut through bands, bar stock, rebar, and various other metals. It uses a piece of 1/2 bar stock for leverage in the handle, and this thing will cut all day long without fail. It is heavy, about 300lbs, and was properly stripped to bare metal, primed, and painted to last.
Its in perfect working order, and it would be a great addition to any shop.
If you have any questions, please email me.
You can have this great piece of equipment for only $500.00 plus shipping. Pick up in Jacksonville Florida is free of course, and I will strap the item to a small pallet for shipping for a nominal fee.

Click here for Picture of the Shear
Click here for Another Picture of the Shear

Email: James Salinas
Jacksonville, Florida
Telephone: 904.536.8882

(09/29/2007)


FOR SALE - Die Grinder

Used Diequip BG-4 Internal Die Grinder with three high speed spindle systems.
Asking price is $7,500.00

Click here for Picture of the Die Grinder
Click here for Another Picture of the Die Grinder
Click here for Another Picture of the Die Grinder
Click here for Another Picture of the Die Grinder
Click here for Another Picture of the Die Grinder

Email: Stanley Edmondson
3623 State Route 142
Moody Mo. 65777
Telephone: 417-284-8031

(11/25/2007)


FOR SALE - Lathe

Metal Lathe made by Sheldon and all it's attachments and tools to many to list.
I believe it is an early Sheldon model 3800 series.
From the pictures I have found on sheldon lathes It looks exactly like the Circa 1938 Sheldon with built-on overhead countershaft and motor unit.
It has a swing of 10" and a bed length of 38".
This is a bench mountable Metal Lathe.
Single Phase - This can be powered with 110 or 220.

Click here for Picture of the Lathe Grinder
Click here for Another Picture of the Lathe
Click here for Another Picture of the Lathe
Click here for Another Picture of the Lathe
Click here for Another Picture of the Lathe
Click here for Another Picture of the Lathe
Click here for Another Picture of the Lathe

$899.00 or obo.
Email: Kevin Karpes
Milton,Wisconsin
Telephone: 608-295-6555

(12/26/2007)


FOR SALE - 2 Lathes

1 Ames Lathe with quick drill tail stock $100.00
1 With collet closure and homade deep hole drilling tailstock $125.00
Both in South Eastern Michigan

Click here for Picture of the Lathes

Email: Linda Hosford

(01/01/2008)


FOR SALE - Electrical Transistor Inverter Equipment


Toshiba Model VFA 3 2022 P, 10 amp. It has been tested and will control a 3 phase 220 motor up to 10 amps.
If single phase 220 is used on the input downgrade the capability to about 2/3's.
It has a rating of 2.2kw. the users booklet can be downloaded on the internet..

Click here for a Picture of the Equipment
Click here for a Picture of the Equipment

Asking $160.00 - Free shipping to usa only. Email: Andy Kulick
Sayreville, NJ
Telephone: 732-257-5984

(03/02/2008)


FOR SALE - Air Compressor


15 hp Quincy Air Compressor Model 03 701.
Built Date 11-30-06. Has about 50 operating hours on it.
230V AC, 3 ph, 44 amps. 55 cfm at 150 psi.. Air receiver volume 120 gal. horizontal.

Click here for a Picture of the Compressor
Click here for a Picture of the Compressor
Click here for a Picture of the Compressor

$2,500.00 firm
Email: Vincent Toscano
Port Chester, NY
Telephone: 347-738-0453

(03/02/2008)


FOR SALE - Pipe Turner


Panjiris "Super Piper" 115 V AC, 1 ph 6.5 amps,. Drive Rolls are DC driven.
12" rolls with a max capacity of 48"pipe diameter, 10,000lbs. weight.

Click here for a Picture of the Turner
Click here for a Picture of the Turner
Click here for a Picture of the Turner
Click here for a Picture of the Turner

$6,500.00
Email: Vincent Toscano
Port Chester, NY
Telephone: 347-738-0453

(03/02/2008)


FOR SALE -Tools


I have the following tool items available:

Click here for a Picture of the Tools
Click here for a Picture of the Tools
Click here for a Picture of the Tools

Email: David Van Natta
Cherokee, Iowa
Telephone: 712-225-3065

(03/17/2008)


FOR SALE -Punch Press


53 ton #5 Bliss Punch Press. Serial # HP30892 3 Phase, 5 hp motor. In running Condition. Weights approx. 10,000 lbs.

Click here for a Picture of the Press
Asking Price: $1800.00
Email: Alan Zablonski
Sheffield, MA
Telephone: 413-229-7919
Fax: 413-229-0465

 


FOR SALE - Machine Shop

"Select" Machine Shop
12" x 36" Lathe with stand,
Band Saw with stand.
Milling Machine with table,
0-6" Fowler Micrometer,
Tap & Die Set,
8" Rotary Table.
3-1/2" Drill and Milling Vice.
Misc. Cutting Tools & Drills.
Click here for a Picture of the Tools
Click here for a Picture of the Tools
Click here for a Picture of the Tools
Asking Price: $ 3,500.00
Email: Christy Nissen
Opelika, AL
Telephone: 334-749-1797

(04/06/2008)



FOR SALE - Lathe South bend 10k metal lathe for sale
Lathe is in great shape. for the man who takes pride in how his machines look and function.
All ready to go.
Has 7/8 inch spindle hiole,,,ten collets and draw bar.
3 jaw chuck, steady rest, single phase 110 vlt motor.
If you would like speed control I'll include a freebie toshiba inverter in case you want to control a motor from zero to full.
Click here for a picture of the Lathe
Click here for another picture of the Lathe
Price $1750.00
Email: Andrew kulick
88 Standiford Avenue
Sayreville NJj 08872
Telephone: 732 257 5984

(05/02/2008)

Return to Home Page

Created: 01/01/2002
Last Rev: 05/02/2008